engineer

  • 6 Piece Precision Screwdriver Set, Mini Sizes, Phillips (Cross Head) with Custom Hard case. ENGINEER dm-20
  • details Amazon
  • Angle Measurement Tool Multifunctional Stainless Steel 180 Degree Angle 15cm Measurement Protractor Ruler DIY Measuring Folding Ruler Angle Engineer Protractor Gauge Painting Drawing
  • details Amazon
  • Collins Md-4h/c/32443 truper Engineer Hammer by Collins
  • details Amazon
  • 5" Blue Cast Iron Heavy Duty Swivel Bench Table Engineer Vise Workshop Clamp Milling Metalworking Vice
  • details Amazon
  • PEC Tools USA 6" Flexible Stainless 5R Machinist Engineer ruler / rule 1/64, 1/32, 1/10, 1/100
  • details Amazon
  • Cordless Soldering Iron (Kotelyzer Heat Tool - Butane Gas), high Quality (Japanese). Engineer skc-70
  • details Amazon
  • Bit Pit' 6.35mm (1/4") hex Screwdriver/Drill bit Holder (Green). Made in Japan. ENGINEER dr-62
  • details Amazon
  • Sunix Wooden Tool Box Chests Wood Cabinet Engineer
  • details Amazon
  • Alvin 312E 12" Engineer Aluminum Triangular Scale
  • details Amazon
  • Super Low Profile Right Angled Ratchet Screwdriver (Only 22mm Tall) Bit Assortment, Fits Into Restricted & Confined Places. ENGINEER Dr-55
  • details Amazon
  • Precision Universal Crimping Tool with Inter-Changeable die Plates (Size S) Handy Crimp Tool. Made in Japan. ENGINEER pad-11
  • details Amazon
  • Compact Precision Compact Long Nose Pliers (Needle Nose),Professional Grade, ESD Safe with Carbon Steel Jaws. Made in Japan. ENGINEER ps-01
  • details Amazon
  • Metal Taper Hole Reamer (for 6mm~30mm diameter holes) High Carbon Steel. Made in Japan. Engineer tr-04
  • details Amazon
  • Carbon Steel Ruler Straight Flat Edge Engineer Measure Tool, for Checking if a Surface is Flat - Silver, 200mm
  • details Amazon
  • Rcool Multifunctional Stainless Steel 180 Degree Angle 10cm Measurement Protractor Ruler DIY Measuring Folding Ruler Angle Engineer Protractor Gauge Painting Drawing Measuring Instrument Ruler Tool
  • details Amazon
  • Replacement Tips for ptz-41 Tweezers. ENGINEER ptz-91
  • details Amazon
  • ENGINEER SS-22 Spring Tool (hooking Implement). Made in Japan
  • details Amazon
  • chip Cutters, 45 Degree Angled Jaws for Quick & Easy Removal of ICS (DIL DIP SIP Packages etc.).Made in Japan. ENGINEER nz-05
  • details Amazon
  • Precision Universal Crimping Tool for Crimping Mini Crimp pins. Made in Japan. ENGINEER pa-21
  • details Amazon
  • Precision Wire Strippers, Professional Grade, Super Sharp Carbon Steel Jaws. Made in Japan. ENGINEER pa-07
  • details Amazon
  • Heavy Duty Diagonal Side Wire Cutters, Hardened Carbon Steel Jaws. Made in Japan. ENGINEER nk-36
  • details Amazon
  • Precision Universal Crimping Tool with Inter-Changeable die Plates (Size M) Handy Crimp Tool. Made in Japan. ENGINEER pad-12
  • details Amazon
  • fine tip Stainless Steel Tweezers (Straight Ends), 150mm Long. ENGINEER pt-02
  • details Amazon
  • -9%
  • Compact Precision Compact Flat tip Long Nose Pliers (Flat Nose),Professional Grade, ESD Safe with Carbon Steel Jaws. ENGINEER ps-04
  • details Amazon
  • 6-in-1 Multi-Function Wiring Tool - Crimping Tool, Wire Strippers, Wire Cutters and Metric Screw Cutter. Made in Japan. ENGINEER pa-01
  • details Amazon
  • Low Profile Stubby ratcheting Palm Screwdriver. ENGINEER dr-54
  • details Amazon

Already use this email address engineer

6 Piece Precision Screwdriver Set, Mini Sizes, Phillips (Cross Head) with Custom Hard case. ENGINEER dm-20
  • 6 precision phillips (cross head) screwdrivers
  • knurled grips with freely rotating ends, to aid precise adjustment
  • Contains the most popular / useful sizes
  • Supplied in a custom hard plastic case
Angle Measurement Tool Multifunctional Stainless Steel 180 Degree Angle 15cm Measurement Protractor Ruler DIY Measuring Folding Ruler Angle Engineer Protractor Gauge Painting Drawing
  • 2 in 1 with our clever idea to converge goniometer and ruler in a double graduation 0-180 degrees, measuring length from 0 to 15 centimeters/0-6in.
  • Protractor Material: Made of polished stainless steel, brass lock nut, High quality stainless steel material is durable.exquisite workmanship, durable, wear-resistant, comfortable feeling.
  • Professional tool for drawing or measuring angles or lines. For drawing radial lines, setting bevels and transmitting angles.
  • Adjust suction cup by loosening the screw. Used to draw radial lines, skew, and translate angles
  • The protractor ruler alarm and the dial head can be disassembled; perfect for school, commercial, home, mechanical work, woodworking etc.
Collins Md-4h/c/32443 truper Engineer Hammer by Collins
  • Handle Material: Hickory
  • Face Type: Polished Face
  • Handle Length: 16 in.
  • Hammer Type: Engineer
  • Head Material: Steel
5" Blue Cast Iron Heavy Duty Swivel Bench Table Engineer Vise Workshop Clamp Milling Metalworking Vice
  • FAST DELIVERY - Shipped from UK, You can receive package within 3 Business Days(Only UK Addresses)
  • PREMIUM MATERIAL - The vise body is made from heavy duty cast iron for high hardness and durability. Vise jaws are made of 45# steel with diamond-shape grooves which provide more clamping force in order to keep workpiece more stable during machining
  • HIGH PERFORMANCE - The vise can be bolted(bolts are not included) onto the top surface of a workbench, with the face of the fixed jaws just forward of its front edge. The vise includes a small anvil on the back of its body
  • EASY TO CLEAN - Surface is finished by power coating which makes the vice beautiful, durable and easy to clean dirt and oil
  • GREAT SERVICE - We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time,all the emails will be replied within 24 hours
PEC Tools USA 6" Flexible Stainless 5R Machinist Engineer ruler / rule 1/64, 1/32, 1/10, 1/100
  • This rule is made in the USA by Products Engineering Company (PEC Tools), a premier US tool manufact
  • It is made from the finest stainless steel available and is hardened and tempered
  • It has a brushed finish and is precision photo etched and then black filled for easy readability.
  • 5R markings with 1/10", 1/100" and quick-reading 1/32" and 1/64"
  • 6" flexible rule is .500" wide and .020" thick. .Both long edges are ground flat and straight.
Cordless Soldering Iron (Kotelyzer Heat Tool - Butane Gas), high Quality (Japanese). Engineer skc-70
  • Built-in piezo ignition button - press This button and a spark is generated which ignites the gas (therefore no lighter required)
  • Super quick heat up with one-touch operation
  • Up to 4 hours operation off one gas 'fill' (Many cordless soldering irons will only Last 40 minutes!)
  • Variable temperature control (equivalent to 20-80w electric soldering iron)
  • Flameless and safe heat generating system by patented gas catalyst reaction by patented gas catalyst reaction
  • Made in Japan
Bit Pit' 6.35mm (1/4") hex Screwdriver/Drill bit Holder (Green). Made in Japan. ENGINEER dr-62
  • 6.35mm (1/4") hex shaft 'bit holder/dock- for holding screwdriver bits - see video in gallery
  • precisely engineered hold/release mechanism
  • bit detaches with a simple slide of the outer cover
  • ideal for 'working at height' situations
  • compact and stylish
  • green in colour
  • made in Japan (ROHS Compliant)
Sunix Wooden Tool Box Chests Wood Cabinet Engineer
  • 🌿[LARGER STORAGE SPACE]: 33.9x17.7x9.9in large power tool cabinet could store your power tools. The compartment can hold 5 drills and and allows for more accessories. Top shelving big enough to fit many small tools like screwdrivers, hammers, tape. Also fits large impact wrench. There are also two ample shelving room for chargers, batteries and tool case.
  • 🌿[EASY LOCATE AND GRAB]: Hierarchical, simple and full-featured tool cabinet with angled level helps you easy to locate and quickly grab what you need.
  • 🌿[DURABLE AND HIGH QUALITY]: Crafted from natural Finland logs, it's anticorrosive, environmentally friendly and grain clear, making it durable for long term use.
  • 🌿[WELL ORGANIZED YOUR TOOL]: Sunix tool cabinet is sturdy enough to organize your power drills/impact drivers, wall mounted feature helps free up your space. If you are looking for an organizational solution for tools in garage and workshop. Sunix Power Tool organizer is definitely your best choice!
  • 🌿[WARRANTY]: All Sunix products comes with 30-day money-back Guarantee for any reason and 1 year warranty for for quality-related issues
Alvin 312E 12" Engineer Aluminum Triangular Scale
  • Printed calibrations on a durable, ultra-smooth surface that resists stains and abrasions. Color-coded furrows.
  • 12" scale with standard engineer graduations of 10, 20, 30, 40, 50, & 60 parts per inch.
Super Low Profile Right Angled Ratchet Screwdriver (Only 22mm Tall) + Bit Assortment, Fits Into Restricted & Confined Places. ENGINEER Dr-55
  • Compact, right angled & low Profile - only 22mm with The bit fitted
  • Gets into conne and restricted spaces where other screwdrivers can't go!
  • Built-in ratchet mechanism (rotational direction set via a lever)
  • 'Quick ratchet dial' (Allows rapid screw tightening using your finger & thumb - increases productivity)
  • Accepts standard 6.35mm (1/4") Hex shaft bits (single or double ended)
  • Supplied with a 6PC Bit Set Phillips sizes #1, #2 (x 2) & #3 and 1 x slot tip (6mm)
  • Supplied with a 'bullet' Style bit holder - ideal for portable use
  • Made in Japan (ROHS compliant)
Precision Universal Crimping Tool with Inter-Changeable die Plates (Size S) Handy Crimp Tool. Made in Japan. ENGINEER pad-11
  • ultra precise crimping tool for open-barrel contacts with inter-changeable plates
  • supplied fitted with 1 x "S" die plate set (other die plate sizes available)
  • allows crimping of over 90 different manufacturer pin types
  • die widths - 0.7mm,1.0mm, 1.3mm, 1.6mm, 1.9mm & 2.2mm
  • easy die plate swap-out, with perfect alignment into the frame's jaws (2.5mm hex key wrench supplied)
  • integral wire stripper & cutter
  • spring loaded handles for easy operation (handles latch shut for storage)
  • oil-resistant TPR (thermoplastic rubber) grips for unmatched comfort (strap holes at end of handles)
  • constructed from special alloy steel
  • made in Japan (ROHS Compliant)
Compact Precision Compact Long Nose Pliers (Needle Nose),Professional Grade, ESD Safe with Carbon Steel Jaws. Made in Japan. ENGINEER ps-01
  • compact, long nose pliers - ideal for precision PCB work, lab/science work, crafts etc.
  • serrated jaws to firmly grip objects
  • wire cutting jaws (cutting capacity: 2mm copper wire)
  • ESD safe comfort grips, constructed from oil resistant thermoplastic elastomer
  • spring loaded handles to aid repetitive work (helps avoid hand fatigue)
  • strap holes at end of handles
  • constructed from S58C Carbon steel (hardness: HRC58 ±4)
  • made in Japan (ROHS compliant)
Metal Taper Hole Reamer (for 6mm~30mm diameter holes) High Carbon Steel. Made in Japan. Engineer tr-04
  • a hand operated, metal tapered reamer - ideal for finishing and deburring panel holes
  • useful in opening holes out to non-preferred diameters
  • for reaming holes 6mm~30mm in diameter
  • constructed from S45C carbon steel (hardness: HRC55 ±3)
  • made in Japan (ROHS Compliant)
Carbon Steel Ruler Straight Flat Edge Engineer Measure Tool, for Checking if a Surface is Flat - Silver, 200mm
  • For checking the edge, using the light-gap method.
  • The blade is bevelled on both sides.
  • Flat edge, beams and blades are ground and lapped.
  • Supplied in a protective case.
  • Use For: edge measuring, designed for precision layout and measurement work.
Rcool Multifunctional Stainless Steel 180 Degree Angle 10cm Measurement Protractor Ruler DIY Measuring Folding Ruler Angle Engineer Protractor Gauge Painting Drawing Measuring Instrument Ruler Tool
  • Material: Stainless Steel; Size: 198x53x14mm/ 7.80x2.09x0.55"
  • Double graduation from 0-180 degree wind angle
  • Used to set bevels and measure and mark angles
  • Perfect for school, commerical or home in machinist, woodworking and homework applications
  • Measuring tool has a adjustable protractor arm that can be held in place with the locking nut; quickly and easily identify angles
Replacement Tips for ptz-41 Tweezers. ENGINEER ptz-91
  • replacement tips for the Engineer ptz-41 tweezers
  • constructed from PPS (engineering plastic) - holds objects delicately without damage
  • ESD safe - ideal for handling static sensitive components & plastic (surface resistivity: 1x10e5 to 10e7 ohm)
  • anti-acid & high wear resistance
  • heat resistance to 270C
  • ROHS compliant
ENGINEER SS-22 Spring Tool (hooking Implement). Made in Japan
  • a hooking tool for attaching springs
  • can also be used as a problem solving tool in other situations (e.g removing connectors, arranging wires etc.)
  • overall length 215mm, diameter 3mm
  • made in Japan (ROHS compliant)
chip Cutters, 45 Degree Angled Jaws for Quick & Easy Removal of ICS (DIL DIP SIP Packages etc.).Made in Japan. ENGINEER nz-05
  • jaw end angle set at 45 degrees (perfect for snipping components with the jaws positioned flush to a PCB circuit board)
  • heat treated carbon steel for excellent cutting performance & durability
  • outstanding sharp cutting jaws
  • jaw opening angle adjuster - sets how wide jaws open when grips released (enhances productivity & less hand fatigue for repetitive cutting work)
  • supplied with 1.5mm hex key wrench as standard accessory (to set the jaw opening angle adjuster)
  • comfort cushioned grips , ESD compliant - made from oil resistant elastomer (strap holes at end of handles)
  • spring loaded handles to aid repetitive work - helps avoid hand fatigue
  • cutting capacity (φ dia.): 0.6mm copper wire
  • material : S58C Carbon Steel (hardness: HRC 58 ±4)
  • made in Japan (ROHS Compliant)
Precision Universal Crimping Tool for Crimping Mini Crimp pins. Made in Japan. ENGINEER pa-21
  • crimp AWG28~AWG18 wires across over 100 different pins (& D-SUB connector contacts) from the main crimp pin manufacturers
  • also capable of crimping open barrel pins with longer style lugs (yields an excellent 'pin curling' result)
  • professional results (& at a fraction of the price charged by the pin vendors for their own specific crimping tools)
  • 4 different crimping die widths - 1.6mm, 1.9mm, 2.2mm & 2.5mm
  • spring loaded handles for easy operation (handles latch shut for storage)
  • oil-resistant TPR (thermoplastic rubber) grips for unmatched comfort (strap holes at end of handles)
  • original joint-screw by "Engineer" allows quick & easy maintenance
  • light & compact body for fatigue-free work
  • constructed from S55C Carbon Steel
  • made in Japan (ROHS Compliant)
Precision Wire Strippers, Professional Grade, Super Sharp Carbon Steel Jaws. Made in Japan. ENGINEER pa-07
  • strips both stranded copper wire AWG24~AWG12 (SWG25~SWG13) & solid copper wire AWG22~AWG10 (SWG23~SWG12)
  • exceptionally sharp & precise carbon steel jaws
  • clean edge to the insulation strip, with no damage to the copper conductor wires (unlike most automatic wire strippers)
  • spring loaded for easy operation (handles latch shut for storage).
  • oil-resistant TPR (thermoplastic rubber) grips for unmatched comfort
  • original joint-screw by "Engineer" allows easy & quick maintenance
  • strap holes at end of handles
  • constructed from S55C Carbon Steel
  • made in Japan (ROHS Compliant)
Heavy Duty Diagonal Side Wire Cutters, Hardened Carbon Steel Jaws. Made in Japan. ENGINEER nk-36
  • cutting capacity: steel wire 2mm, copper wire 3.2mm dia
  • constructed from from s58c steel (hardness: HRC60 ±4)
  • 155mm in length
  • made in Japan (ROHS Compliant)
Precision Universal Crimping Tool with Inter-Changeable die Plates (Size M) Handy Crimp Tool. Made in Japan. ENGINEER pad-12
  • ultra precise crimping tool for open-barrel contacts with inter-changeable plates
  • supplied fitted with 1 x "M" die plate set (other die plate sizes available)
  • allows crimping of over 100 different manufacturer pin types
  • die widths - 1.6mm, 1.9mm, 2.2mm, 2.5mm, 2.8mm & 3.1mm
  • easy die plate swap-out, with perfect alignment into the frame's jaws (2.5mm hex key wrench supplied)
  • integral wire stripper & cutter
  • spring loaded handles for easy operation (handles latch shut for storage)
  • oil-resistant TPR (thermoplastic rubber) grips for unmatched comfort (strap holes at end of handles)
  • constructed from special alloy steel
  • made in Japan (ROHS Compliant)
fine tip Stainless Steel Tweezers (Straight Ends), 150mm Long. ENGINEER pt-02
  • 150mm long, straight tweezers with fine pointed tips
  • ideal for handling sensitive components
  • constructed from stainless steel (SUS304 - Chrome 18 / Nickel 8)
  • anti-magnetic, anti-acid and anti-corrosive
  • medium spring action
  • ROHS compliant
Compact Precision Compact Flat tip Long Nose Pliers (Flat Nose),Professional Grade, ESD Safe with Carbon Steel Jaws. ENGINEER ps-04
  • compact pliers with fine square/flat tips (non-serrated jaws), ideal for precise PCB work etc.
  • ESD safe comfort grips, constructed from oil resistant thermoplastic elastomer
  • spring loaded handles to aid repetitive work (helps avoid hand fatigue)
  • strap holes at end of handles
  • constructed from S58C Carbon steel (hardness: HRC58 ±4)
  • made in Japan (ROHS compliant)
6-in-1 Multi-Function Wiring Tool - Crimping Tool, Wire Strippers, Wire Cutters and Metric Screw Cutter. Made in Japan. ENGINEER pa-01
  • 6-in-1 multi-purpose wiring pliers tool
  • crimps open barrel terminal pins (0.3mm~1.25mm²)
  • crimps insulated terminal pins (0.3mm~over 2.00mm²)
  • crimps bare teminal pins (0.5mm~2.00mm²)
  • screw cutter - neatly cuts M2, M2.6, M3, M4 & M5 metric screws down to the required length
  • wire stripping jaws - AWG28~14 (0.1mm~2.00mm²)
  • wire cutting jaws
  • made in Japan (ROHS Compliant)
Low Profile Stubby ratcheting Palm Screwdriver. ENGINEER dr-54
  • low profile stubby (short handled) screwdriver with ratchet mechanism
  • compact size allows access into confined and difficult areas
  • anodised aluminium handle
  • magnetised bit socket to attract & hold the bit firmly & securely in place
  • supplied with 1 x Phillips size #2 bit - 25mm long (protudes 18mm once fitted into the handle)
  • handle receives any standard 6.35mm (1/4") hex shaft bit
  • ROHS compliant
More options available: engineer


More options available:

BestToolsStore.co.uk
This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program
designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon sites.